The total system is Plug & Play with no hard wiring required.
The components just snap together and cannot be connected incorrectly.
The Duplex Inserts are numbered to identify which circuit
is being used.
The Electrical Outlets clip into the back of the Power Port
using Spring Tension Clips and provides an easily accessible
and very flexible electrical system.
Some Technical Stuff
The Standard Powerflor Electrical System is as manufactured
by Tyco/AMP and is their, 8 Wire" Innergy" system.
This system provides four 20 ampere circuits per building
feed.
Standard Powerflor System provides 20 ampere duplex outlet
inserts.
Standard System provide three standard circuits (shared neutrals
& grounds) and one isolated circuit.
Each outlet location is powered with all four circuits so
Inserts can be easily changed for alternate circuit feed without
rewiring.
Optional system configurations include two isolated circuits
per building feed and isolated grounding for all circuits.
Standard Electrical System is completely shielded from Data/Comm
cabling.
